Discover Effortless Elegance: Horizon-Loc (H-Loc®) Metal Roofing Panels
Experience the beauty of a fastener-free metal roof with Horizon-Loc (H-Loc®). Enjoy all the benefits of a standing seam roof at a reduced cost. These panels seamlessly snap together, ensuring swift and straightforward installation without the requirement for mechanical seaming. Save on labor expenses compared to traditional standing seam panels.
Key Features:
- 26-gauge, 16″ Panel
- Concealed fasteners for a seamless appearance
- Lifetime paint warranty ensures lasting durability
- 30-year fade warranty for continued vibrancy
- Offers the best price point among residential metal roofing products
- Fastest installation time for efficiency
- UL580 Uplift resistant and UL790 approved fire resistance for added safety
Timeless Protection: Panel-Loc® Steel Roofing with CentralGuard
This timeless design provides steel protection with an appealing aesthetic for agricultural, light commercial, and residential roofs alike. Engineered with CentralGuard® protection, Panel-Loc ensures resistance against fading, dents, and rust.
- Available in both 26-gauge and 29-gauge options, Panel-Loc stands as a dependable low-rib panel solution for metal buildings and roofs.
- Choose from 29-gauge and 26-gauge variants, featuring a 36” panel width.
- Ideal for pole barns and industrial buildings, Panel-Loc offers the most affordable option for metal roofing.
Enhance with UNA-CLAD UC-7 Standing Seam Panel: eRoof’s Premium Option
The UNA-CLAD UC-7 Roofing Panel is a factory-formed, Snap-On Batten standing seam metal roof panel. Featuring a simple installation process, it presents the sleek look of a thin-line standing seam. Available in diverse materials and finishes, including Kynar™ coated G-90 Galvanized Steel, Aluminum, and Copper.
Key Features:
- Standard size: 24 gauge, 14” wide panel without striations
- Utilizes hidden fasteners
- Offers the most aesthetically pleasing standing seam option
- Class 4 impact-resistant product
- Effectively prevents ice damming
- Lifetime product guarantee
- Fire rating: UL Class A Rated Assemblies, UL 263, and UL 790
- Uplift resistant: UL 580 Class 90
We offer two main types of warranties: a paint warranty and a substrate warranty.
Warranties are issued to the original owner, at the time of installation, of the structure where the materials are originally installed. Warranties are non-transferable and non-assignable after one year from the date of install. The original homeowner may transfer the warranty to a new homeowner within the one year period after installation. In the case of a builder and new construction, the builder can sell the home within one year of installation and the warranty will transfer to the new buyer.
Fade is warrantied on Ultra, Prime, and Standard product models. Fade is not warrantied on thrifty panels. Remember, your metal roof is going to be exposed to years of harsh sun and elements. Eventually, the elements will affect your paint finish by either making it a lighter shade (fading), or causing it to become less glossy and take on a powdery finish (chalking). Your warranty guarantees that the paint finish will not fade or chalk over a certain amount in thirty-years. Check your warranty for the acceptable amount of fading and chalk for both the roof and sidewalls.
In most cases, it would be safe to walk on a metal roof, as long as the proper safety steps are taken (some examples include: proper footwear, proper fall protection, dry conditions, etc.). If installed properly, and with the proper precautions followed, walking on the roof should not damage the metal, but please check with the manufacturer guidelines for install and for safety awareness.
Always keep trees and debris off the roof, including snow and ice. You should have a professional installer to check for corrosion, touch up paint, and clean the panels properly – every few years.
You’ll need to speak directly to your insurance provider. In some states, you may qualify for an insurance premium reduction for certain metal roofing profiles. Most of our metal panels are UL Class 4 rated for impact resistance. When taking an insurance discount with a metal roof, you may have to waive the right to claims due to aesthetic issues. Check with your insurance agent to fully understand the pros and cons of insurance discounts associated with metal roofs.
Our metal panels are UL Class 4 rated for impact resistance and stand up to weathering better than many other roofing products*. Depending on the panel profile you have installed, hailstorms may cause small dents in the flat areas. This is only aesthetic and will not cause water penetration.
*5V has not been tested for this rating.
*5V has not been tested for this rating.
Our panels have passed UL790 approval for Fire Resistance, Class A*. UL describes Class A roof coverings as effective against severe fire test exposures. Under such exposures, roof coverings of this class “afford a high degree of fire protection to the roof deck, do not slip from position, and are not expected to produce flying brands.” More details for UL790 can be found at the UL website.
*5V has not been tested for this rating.
*5V has not been tested for this rating.
Our metal panels feature Sherwin-Williams brand paints that are resistant to many elements found in the environment such as air pollution, acid rain, and general airborne dirt. However, if the need to clean or remove deposits from your paint does arise, please download and follow the Sherwin-Williams cleaning and maintenance guide.
While it is possible to repaint a metal roof, know that the repainted roof may peel and need occasional maintenance to fix. Talk to a paint specialist to select the right type of paint and make sure to clean it properly and follow the instructions from the paint manufacturer. Notice that repainting your roof will void any Central States warranty for the roof section that has been repainted.
Yes. Spray foam insulation can be applied to metal panels on open decking systems after the metal panels are installed, provided the following care is taken:
The Spray Polyurethane Foam Alliance, an association representing leaders in the SPF industry, has created a guideline for insulating metal buildings with spray polyurethane foam. It can be reviewed by clicking here. More information is available on their website at www.sprayfoam.org.
- Thermal spacers must be used on all metal purlins/framing to prevent rust or uneven color.
- All panels are properly installed and fastened securely.
- No overspray of foam insulation gets onto the top side of the panels.
- Spray is uniformly applied: non-uniform applications can cause thermal shock and loosening of fasteners, or potentially create uneven color.
- Insulation should be pH neutral (non-acidic and non-alkali) to avoid corrosion of metal panels.
- All structures and conditions comply with prevailing building codes.
- All proper surface preparation and application procedures are followed per manufacturer guidelines and per SPFA-134.
- If possible, apply foam in an inconspicuous area to check adhesion before applying to the entire job.
The Spray Polyurethane Foam Alliance, an association representing leaders in the SPF industry, has created a guideline for insulating metal buildings with spray polyurethane foam. It can be reviewed by clicking here. More information is available on their website at www.sprayfoam.org.
